Can you reuse volcano vaporizer bags

If that wont work, mix vodka with orange juice and use that screwdriver. Is it supposed to be so difficult to pry out the bag? To even get the flathead in between I had to brace the piece on a hard surface and use my weight. Try soaking the mouthpiece in hot water to soften the plastic. It gets easier the more times you pry it out. Also I find using a small screwdriver makes a difference.

Great was looking online to buy new bags and stumbled across this. Used a oven bag instead. Thanks for the tip. Great site! Replace Easy Valve Volcano Bags. Using a very small flat head screw driver, pop out the bag from the mouthpiece by sliding the flat head up between the bag and the orange plastic, and then prying the bag out. Do this slowly and carefully, and be careful. Remove the black o-ring and the clear plastic retaining ring from inside the bag. Remove the bag and save for extraction or discard.

Make sure not to loose the valve, which is a small disc of rubber. Clean all the reusable parts. I recommend hot soapy water. The Digital Volcano can follow the same ramp-up profile by slowly increasing the temperature as the bag fills. Over time, the Volcano may start to rattle or make a low sound when in use. The rattling is caused by screws coming loose over time, and the screws used are not conventional.

Torx T8 safety screwdrivers are the right option to tighten the screws and keep the unit from rattling. Loctite can be used with great success to keep the screws from working their way out of the Volcano.

Replacement screws are available direct, and the replacement screws will use the conventional screw that can be used with a Philips screwdriver.

If screws are lost over time, they are able to be replaced direct from the manufacturer. Q-tips and rubbing alcohol will be used extensively during the cleaning process, allowing users to thoroughly clean out all components of the Volcano. A person using the Volcano daily will need to change bags more often than a weekly or casual user. The general rule of thumb is that the bag needs to be replaced when it starts to stick to itself.

This happens after extended use, and users will need to help the bag fill more. Others will begin replacing their bags when the vapor begins to leak from the seal of the gaskets. There is also a school of thought that the bags should be changed once their color starts to turn. Heavy users will change their bags once a month or as often as every two weeks if the resin starts to build-up in the unit.

See replacement parts. A lot of users forget to clean their Volcano, and like any vaporizer, there will be gunk build-up and cleaning required. Cleaning is going to keep your unit running more efficiently for longer. If you use the unit a few times a week, a monthly cleaning schedule will suffice. Monthly cleanings are ideal, keeping the unit clean and running efficiently. Valves are disposable, and there are a few parts of the filling chamber that should be cleaned and soaked.

The plastic parts of the filling chamber and any silicone rings should be soaked in warm soapy water. You can go as short as a few feet, or as long as ten feet for the whole roll. Scrunch the open end of the bag into the silicone O-ring, and pull it down half an inch or so. Fold the bag outward around the O-ring, then stretch it back over the end of the mouthpiece. It helps to start on one side, then use the edge of the bag to pull it around the rest of the cone. Pull the plastic retaining ring back over the mouthpiece, and wiggle it down until it clicks into place.

Why is the Volcano vaporizer more expensive than other Vaporizers? We did not only focus on top-quality material and craftsmanship but we went beyond that to offer the user a safe device, easy to operate for a convenient application. In addition, it was our intention to create the prerequisites for efficient and controlled vaporization.

The unique patented Volcano System Technology conveys air enriched with flavors and active ingredients into a balloon through a valve. Through the innovative valve technique the generated vapors will be completely collected in the balloon and the user can inhale the vapors separately from the device. The content may be inhaled at ease, independently from the vaporization process both comfortably and safely.

In order to achieve the best results, a vaporizer requires an air pump to guarantee a constant air flow, a heat accumulator to grant a precise air temperature and finally the unique valve technology to ensure a simple, reliable and convenient application. These technical features are only offered by the Volcano. The accurate air temperature control of the volcano sets new standards for vaporizers in precision and reliability.

It is our belief that with the Volcano we offer you the best product available, it equals the highest quality claims and is unique and reliable, due to its first-class processing. Which factors determine the vapor build-up in the balloon? The proportion of flavor and active ingredient vapor in the balloon primarily depends on the quality and quantity of herbs with which the vaporizer is filled.

Other important factors are the surface area of the herbs and the vaporizing temperature. The amount of active ingredients released into the balloon can be influenced by the following factors:. Quality: The concentration of ingredients in your plant material. Quantity: The amount of plant material in your filling chamber. Temperature: The higher the temperature, the more active ingredients will be released at once. Surface: The finer the plant is grinded, the greater the surface area and the more ingredients can be released during vaporization.

View our range of herbal grinders. The ingredients of a plant are released in a gentle way so that a repetition of vaporization with the same material in the filling chamber is possible. Depending on the 4 factors described above, the material in the filling chamber can be reused several times until all aromas and active ingredients are completely dissolved.

It is advised to take out the content of the filling chamber and grind it once again to increase the surface area of the original material. If the material is ground well, it is not necessary to grind it again.

An increased temperature would activate more ingredients as well, but has a negative effect on the flavor. It is important to watch the vapor density in the balloon. A fine, white vapor feels very comfortable when inhaled. As the vapor gets denser the taste looses flavor. In case of a very high vapor intensity density the concentration of aromas and active ingredients can cause an irritation of the respiratory tract.

If this is the case reduce the temperature. Incidentally, the flavor has little to do with the effect. Flavor inducers relatively volatile essential oils vaporize much quicker than active ingredients.